En 10208-2 Seamless Pipes
Manufacturer of BS EN 10208 Pipe and UNI EN 10208-2 Material

En 10208-2 Seamless Pipes

BS EN 10208 Pipe

UNI EN 10208-2 Material
BS EN 10208 Pipes & En-10208-1 - Steel Pipes in various sizes
Table of Content
- Standard Specification of En 10208-2 Seamless Pipes
- Various Types of BS EN 10208 Pipe
- Density of UNI EN 10208-2 Material
- En-10208-1 Steel Pipes Elastic modulus
- Din En 10208-2 Pipe Coefficient of thermal expansion
- Pn-en 10208-2 Tubing Chemical analysis
- Mechanical Properties of Pn-en 10208-2 Seamless Pipe
Standard Specification of En 10208-2 Seamless Pipes
Standard | ASTM, ASME, JIS, AISI, AMS, EN, SAE, DIN, NF, TOCT, DS, DTD, GB |
---|---|
Outer Dimensions | 4.0mm – 60.0mm |
size | 5.0 - 1219.2 mm |
Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
Schedule | SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
Length | Single Random, Double Random, Standard & Cut length |
Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF, NO.1, NO.4, 2B, BA, HL, 8K, Mirror finish, etc |
Form | are available in form of Round, Square, Hollow, Rectangular, Hydraulic, Coiled, Straight Pipes, “U” Shape, Pan Cake Coils etc. |
Types | Seamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW |
End | Plain End, Beveled End, Treaded, Screwed ends |
Application | Dairy, Oil, Gas, Fluid, Boiler for Chemical Industry |
Value Added Service | Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc. |
manufacturing Technique | Cold drawn, hot drawn, bright annealed, solid solution, hot extruding |
Test Certificate | Manufacturer Test Certificate Laboratory Test Certificate from Govt. Approved Lab. Under Third Party Inspection |
Material Test Certificates (MTC) | Material Test Certificates (MTC) as per EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2, 100% Radiography Test Report, Heat Treatment Charts, Raw Materials Certificate, Third Party Inspection Report, Fumigation Certificates, HS Code Commercial Invoice, Form A for Generalized System of Preferences (GSP) |
Various Types of BS EN 10208 Pipe

En-10208-1 - Steel Pipes

Uni En 10208-2 Seamless Tubing

En-10208-2 Non-alloy Tube

Din En 10208-2 Pipe

Pn-en 10208-2 Tubing

Msz En 10208-2 Welded Tube

En 10208-2 ERW Pipe

Pn-en 10208-2 Seamless Pipe
Wide stock of Uni EN 10208-2 Material in out Mumbai warehouse
Density of UNI EN 10208-2 Material
Density | 7.85 g/cm³ at 20 °C |
En-10208-1 Steel Pipes Elastic modulus
Elastic modulus | 217 GPa at -100 °C |
Best price of En-10208-2 Non-alloy Welded Tube ex Mumbai
Din En 10208-2 Pipe Coefficient of thermal expansion
Coefficient of thermal expansion | 1.08E-5 1/K at -100 °C |
Pn-en 10208-2 Tubing Chemical analysis
Grades | Material number | C max | Si max | Mn. mix | P max | S max |
L245NB | 1.0457 | 0.17 | 0.45 | 0.4 | 0.04 | 0.035 |
Check sizes, dimensions and ready stock of Pn-en 10208-2 Seamless Pipe & Msz En 10208-2 Tube
Mechanical Properties of Pn-en 10208-2 Seamless Pipe
Grade | Permissible yield point ratio | Yield Strength MPa(min) | Tensile Strength MPa | Elongation % (min) |
L245NB | ≤ 0.85 | 240 | 370 - 490 | 24 |