EN-10216-4 Seamless Tubes

Buy Din En 10216-5 Tc1 Tube from Supplier in India

EN-10216-4 Seamless Tubes

EN-10216-4 Seamless Tubes

Din En 10216-5 Tc1 Tube

Din En 10216-5 Tc1 Tube

Nf En 10216-5 Seamless pipes

Nf En 10216-5 Seamless pipes


Check EN 10216-5 Pipe dimensions tolerances, Nf En 10216-5 Seamless pipes price per ton in Mumbai, India

Table of Content


Specification of EN-10216-4 Seamless Tubes

Standard ASTM, ASME, JIS, AISI, AMS, EN, SAE, DIN, NF, TOCT, DS, DTD, GB
Outer Dimensions 4.0mm – 60.0mm
size 5.0 - 1219.2 mm
Swg & Bwg 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.
Schedule SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Length Single Random, Double Random, Standard & Cut length Pipe
Finish Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF, NO.1, NO.4, 2B, BA, HL, 8K, Mirror finish, etc
Form are available in form of Round, Square, Hollow, Rectangular, Hydraulic, Coiled, Straight Pipes, “U” Shape, Pan Cake Coils etc.
Types Seamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW
End Plain End, Beveled End, Treaded Pipe, Screwed ends
Value Added Service Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc.
manufacturing Technique Cold drawn, hot drawn, bright annealed, solid solution, hot extruding
Test Certificate Manufacturer Test Certificate
Laboratory Test Certificate from Govt. Approved Lab.
Under Third Party Inspection
Material Test Certificates (MTC) Material Test Certificates (MTC) as per EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2, 100% Radiography Test Report, Heat Treatment Charts, Raw Materials Certificate, Third Party Inspection Report, Fumigation Certificates, HS Code Commercial Invoice, Form A for Generalized System of Preferences (GSP)

Various Types of Din En 10216-5 Tc1 Tube

EN 10216-5 Pipe

EN 10216-5 Pipe

Uni En 10216-5 Tubing

Uni En 10216-5 Tubing

Astm A312 En 10216-5 Seamless Pipe

Astm A312 En 10216-5 Seamless Pipe

Stainless Steel En 10216-5 ERW Pipe

Stainless Steel En 10216-5 ERW Pipe

En 10216-5 Tc1 Round Tube

En 10216-5 Tc1 Round Tube

Din En 10216-5 Tc1 Welded Tube

Din En 10216-5 Tc1 Welded Tube

Tube Inox En 10216-5

Tube Inox En 10216-5

Tubo En 10216-5

Tubo En 10216-5


Buy Stainless Steel En 10216-5Pipe, View En 10216-5 Pipe Sizes

Chemical Analysis of EN 10216-5 Pipe

Steel grades CHEMICAL COMPOSITION (LADLE ANALYSIS)
C% max Si% max Mn% max P% max S% max Cr% max Mo% max Ni% max Al.cał% min Cu% max Nb% max Ti% max V% max
P215NL 0,15 0,35 0,40-1,20 0,025 0,020 0,30 0,08 0,30 >\=0,020 0,30 0,010 0,040 0,02
P265NL 0,20 0,40 0,60-1,20 0,025 0,020 0,30 0,08 0,30 >\=0,020 0,30 0,010 0,040 0,02

Uni En 10216-5 Tubing Mechanical Behaviour

Yield Strength Tensile Strength Elongation A5 min
MPa min ksi min MPa min MPa min ksi min Percentage
410 570 – 24

Equivalent Grade of Tubo En 10216-5

DIN EN BS NFA ASTM ASME
– EN 10216-4 Grade P265NL – – – –

Ready Stock of Tube Inox En 10216-5, Buy Din En 10216-5 Tc1 pipes at reasonable cost

Astm A312 En 10216-5 Seamless Pipe Tolerance Chart

Outside diameter and wall thickness tolerance
Outside diameter D mm Permissible deviations of outside diameter D Permissible deviations of wall thickness t depending on the T/D ratio
<\=0,025 >0,025
<\=0,050		 >0,050
<\=0,10		 >0,10
D<\=219,1 +\- 1% or =\- 0,5mm depending on which is greater +\- 12,5% or 0,4 mm depending on which is greater
D>219,1 =\- 20% =\- 15% =\- 12,5% =\- 10%

En 10216-5 Tc1 Round Tube Length tolerances

Component length (mm) OD 30-100 mm OD 100-254 mm
10-100 + 1.0/- 0 + 2.0/- 0
100-600 + 2.0/- 0 + 3.0/- 0
600-1200 + 3.0/- 0 + 4.0/- 0
1200-5000 + 5.0/- 0 + 6.0/- 0

Din En 10216-5 Tc1 Welded Tube Sizes

Wall Sizes ( O.D.)
.010 1/16" , 1/8" , 3/16"
.020 1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8"
.012 1/8"
.016 1/8" , 3/16"
.028 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2"
.035 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4"
.049 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4"
.065 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3"
.083 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3"
.095 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2"
.109 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2"
.120 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3"
.125 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4"
.134 1"
.250 3"
.375 3 1/2"

Astm A312 En 10216-5 Pipe Supplier, huge discount on Tubo En 10216-5, Check Uni En 10216-5 pipes price list

Size Chart of EN 10216-5 Pipe

1/8" IPS(.405" O.D.) 3 1/2" IPS( 4.000" O.D.)
SCH 40, 80 SCH 10, 40, 80, 160, XXH
1/4" IPS(.540" O.D.) 4" IPS(4.500" O.D.)
SCH 10, 40, 80 SCH 10, 40, 80, 160, XXH
3/8" IPS(.675" O.D.) 5" IPS( 5.563" O.D.)
SCH 10, 40, 80 SCH 10, 40, 80, 160, XXH
1/2" IPS(.840" O.D.) 6" IPS(6.625" O.D.)
SCH 5, 10, 40, 80, 160, XXH SCH 5, 10, 40, 80, 120, 160, XXH
3/4" IPS(1.050" O.D.) 8 ” IPS(8.625" O.D.)
SCH 10, 40, 80, 160, XXH SCH 5, 10, 40, 80, 120, 160, XXH
1" IPS:(1.315′ O.D.) 10" IPS(10.750" O.D.)
SCH 5, 10, 40, 80, 160, XXH SCH 10, 20, 40, 80 (.500), TRUE 80(.500)
1-1/4" IPS(1.660" O.D.) 12" IPS(12.750" O.D.)
SCH 10, 40, 80, 160, XXH SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500)
1-1/2" IPS(1.900" O.D.) 14" IPS(14.000" O.D.)
SCH 10, 40, 80, 160, XXH SCH10 (.188), SCH40 (.375)
2" IPS(2.375" O.D.) 16" IPS(16.000" O.D.)
SCH 10, 40, 80, 160, XXH SCH10(.188), SCH40(.375)
2 1/2" IPS(2.875" O.D.) 18" IPS (18.000" O.D.)
SCH 10, 40, 80, 160, XXH SCH-40 (.375)
3" IPS( 3.500" O.D.)
SCH 5, 10, 40, 80, 160, XXH

Pipe Standards

Our Products

Price List & Calculator

whatsapp chat