IS 3074 Steel Tube
Buy IS 3074 grade CEW/ CDS/ ERW Tubes at factory price
IS 3074 Steel Tube
IS 3074 grade CEW Tubes
IS 3074-79 Seamless Square Pipe
Check price & dimensions of IS 3074 Pipe & IS 3074-79 Seamless Square Pipe
Table of Content
Spec Chart of IS 3074 Steel Tube
| Standard | ASTM, ASME, JIS, AISI, AMS, EN, SAE, DIN, NF, TOCT, DS, DTD, GB |
|---|---|
| Outer Dimensions | 4.0mm – 60.0mm |
| size | 5.0 - 1219.2 mm |
| Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| Schedule | SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
| Length | Single Random, Double Random, Standard & Cut length Pipe |
| Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF, NO.1, NO.4, 2B, BA, HL, 8K, Mirror finish, etc |
| Form | are available in form of Round, Square, Hollow, Rectangular, Hydraulic, Coiled, Straight Pipes, “U” Shape, Pan Cake Coils etc. |
| Types | Seamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW |
| End | Plain End, Beveled End, Treaded Pipe, Screwed ends |
| Value Added Service | Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc. |
| manufacturing Technique | Cold drawn, hot drawn, bright annealed, solid solution, hot extruding |
| Test Certificate | Manufacturer Test Certificate Laboratory Test Certificate from Govt. Approved Lab. Under Third Party Inspection |
| Material Test Certificates (MTC) | Material Test Certificates (MTC) as per EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2, 100% Radiography Test Report, Heat Treatment Charts, Raw Materials Certificate, Third Party Inspection Report, Fumigation Certificates, HS Code Commercial Invoice, Form A for Generalized System of Preferences (GSP) |
View IS 3074 CEW Tube, IS 3074 cds 1 Pipe price per meter ex Mumbai
IS 3074 grade CEW Tubes Types
IS 3074 Pipe
IS 3074 Cew Tube
IS 3074 Cds 1 Seamless Pipe
IS 3074 Erw Tube
IS 3074 Grade Welded Pipe
IS Erw-1 Is 3074 Tubing
IS Erw-1 Is 3074 Steel Pipes
IS 3074-79 Welded Tube
Mechanical Properties of IS 3074 Cds 1 Seamless Pipe
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 479 (≥) | 765 (≥) | 14 | 43 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 432 |
Buy custome sizes IS 3074 ERW Pipe from our Inventory
IS 3074 Erw Tube Physical Properties
| Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
|---|---|---|---|---|---|---|---|
| 44 | - | - | 0.43 | - | |||
| 135 | 384 | - | 24.3 | 331 | - | ||
| 496 | - | 44 | 11.2 | 243 | 222 |
Heat Treatment of IS 3074 Grade Welded Pipe
| Heat treated : 1316°C - 1199°C |
IS ERW-1 IS 3074 steel Tubes length up to 18 meter
Standards & Properties of IS 3074-79 Welded Tube
| Specifi- cation |
Grade | Rm kgf/mm2 N/mm2 | Re kgf/mm2 N/mm2 Min. |
Flattening Test | Drift Expansion on D% | Chemical Composition | Tolerances | |||||||||
| C% | Mn% | C% | Mn% | Mean Outside Diameter | Tole– rance ± mm |
Thickness | ||||||||||
| Min. | Max. | Min. | Max. | |||||||||||||
| Over mm | U.T.I. mm | |||||||||||||||
| IS:3074 – 1979 | ERW–1 | 32 310 |
17 160 |
3t | 12 ½ | – | 0.20 | 0.30 | 0.60 | – | 25 | 0.10 | ±8%^ (excluding the weld). The height of the internal fin shall not be greater than 60% of the specified wall thickness. | |||
| ERW–2 | 39 380 |
25 240 |
5t | 10 | 0.20 | 0.30 | 0.30 | 0.60 | 25 51 |
51 63 |
0.13 0.15 |
|||||
| ERW–3 | 44 430 |
28 270 |
8t | 7 ½ | – | 0.40 | 0.30 | 0.60 | 63 76 |
76 88 |
0.20 0.25 |
|||||
| Crushing Test % mm | Tolerance | |||||||||||||||
| Mean Outside Inside Diameter |
Thickness | Tole–rance on mean thick–ness ± mm | ||||||||||||||
| Over mm |
U.T.I. mm |
Tole–rance ± mm | Over mm |
U.T.I. mm |
||||||||||||
| CEW–1 (anne–aled) | 32 310 |
– | 17 160 |
50 | – | 0.20 | 0.30 | 0.60 | – | 38 | 0.10 | – | 2 | 0.08 | ||
| CEW–1 (As drawn) | 44 430 |
– | 38 370 |
25 | – | 0.20 | 0.30 | 0.60 | 38 | 51 | 0.31 | |||||
| CEW–2 (anne–aled) | 44 430 |
– | 28 270 |
50 | 0.20 | 0.30 | 0.30 | 0.60 | 51 | 64 | 0.16 | |||||
| CEW–2 (As drawn) | 56 550 |
– | 46 450 |
25 | 0.20 | 0.30 | 0.30 | 0.60 | 64 | 77 | 0.19 | 2 | 5 | 0.10 | ||
| Rm: Tensile strength, Re: Yield stress, D: Outside diameter, t: Wall thickness | ||||||||||||||||
